Welcome to Dorset Subaru Owners Club


:IMPORTANT MESSAGE:
* As a Guest you will not be able to view all content of the forum, please Register for full access

* Please post an Intro in the New Members section before posting anywhere else.

* Join Photobucket in order to gain best results regarding posting pictures.

* Firefox seems to be the best browser option for viewing the forum.

Regards
The Admin Team


Home of Dorset Subaru
HomeHomeCalendarRegisterLog in

Share | 
 

 Oil & Cold Starts - Good Advice from Opie Oils

View previous topic View next topic Go down 
AuthorMessage
oilman
....
....
avatar

Number of posts : 322
Location : Sunny Cornwall / UK
Age : 39

PostSubject: Oil & Cold Starts - Good Advice from Opie Oils   Thu Nov 18, 2010 7:15 am

At this time of year, itís beneficial to use an oil that has good cold start flow properties as it will get to the parts of the engine that need it far more quickly when you turn the key on those sub zero mornings.

The "w" number which means winter is the key here and the lower it is the better cold start performance the oil will have.

A 15w or 20w rated oil will struggle to get around the engine in very cold temps and we would strongly recommend using a 10w, 5w or 0w for better cold start performance.

It is a fact that around 90% of all engine wear occurs on cold start because the oil is at its thickest. The colder it gets the thicker the oil becomes and this affects the rate of flow which affects the rate of wear.

These numbers help to explain the oils thickness and therefore cold flow performance at various temperatures.

Grade.................At 0C.................At 10C..............At 100C

0W/20.............328.6cSt...............180.8cSt............9cSt

5W/40.............811.4cSt...............421.4cSt............14cSt

10W/50............1039cSt...............538.9cSt............18cSt

15W/50.............1376cSt..............674.7cSt............18cSt

20W/50.............2305cSt...............1015cSt............18cSt

Centistokes (cst) is the measure of a fluid's resistance to flow (viscosity). It is calculated in terms of the time required for a standard quantity of fluid at a certain temperature to flow through a standard orifice. The higher the value, the thicker the oil.

Winters in the UK are fortunately not too cold but, below zero temperatures are regular features in some parts of the country.

Compare the thickness of the oil at 0degC and 100degC and you will see the big difference.

Just something to consider on those frosty mornings.

The Opieoils Team.
Back to top Go down
http://www.opieoils.co.uk
 

Oil & Cold Starts - Good Advice from Opie Oils

View previous topic View next topic Back to top 

 Similar topics

-
» Opie Oils - Castrol Edge - 1 litre free & handy boot pouch & oil change kit
» Good advice Please
» Oil advice & recommendations from oilman @ Opie Oils
» Do you have some good advice for a returning judoka?
» Opie Oils- Buy 5L get 1L Free on Silkolene Pro S/R (Now Fuchs Titan Race)
Page 1 of 1

Permissions in this forum:You cannot reply to topics in this forum
 :: Traders :: Opie Oils-
Jump to: